I chose to make my own mounts top pick up from the original A series points on the body. The passenger side mount proved to be impossible to mount to the original A series point on the side of the suspension turret because the alternator is there. The yellow bit of metal is a piece of the 65mm box section that was used to reinforce the gearbox crossmember with the bottom cut off it. This hammered onto the rail and is welded on.
MG Midget and Austin Healey Sprite gearbox mounting rubber
(4) MIDGET GEARBOX MOUNTING AHA
Your Login Failed. Your E-Mail and or password are incorrect. Please try again. If you continue to have problems click on the Help Icon for additional options. If you would like login information re-sent to you, click on the button below to request your login information to be re-sent. Shop By Car.
NOTE: If exchanging smoothcase to a ribcase, the shift lever is different. You will need a ribcase shift lever part number: UG Remember: it runs straight SAE 30 weight motor oil for lubrication- not gear oil. Your Login Failed.
Print this page. This thread is from the archive. I noticed that the Rubber Transmission mounts are very worn. In fact they almost look like Jello.